Products from Knipex

Knipex
2 From 6
No results were found for the filter!
Knipex 7721130 Electronics Diagonal Cutter plastic coated 130 mm Knipex 7721130 Electronics Diagonal Cutter...
For fine cutting work, e.g. in electronics and fine mechanics Sturdy, zero-backlash box joint Low-friction double spring for gentle and even opening The polish or mirror polish (only finish 2) together with a fine film of oil offer...
US$39.52 *
Knipex 002015 Compact-Box 4 parts with VDE  tools Knipex 002015 Compact-Box 4 parts with VDE tools
High quality, versatile, shock-resistant plastic case Foam insert with honeycomb structure for variable equipment Dimensions, exterior (W x H x D): 327 x 65 x 275 mm High quality, versatile, shock-resistant plastic case Foam insert with...
US$137.01 *
Knipex 980410 Nut Driver with T-handle 200 mm Knipex 980410 Nut Driver with T-handle 200 mm
Special tool steel, oil-hardened
US$29.45 *
Knipex 0011V50 Magnetic LED Lamp Knipex 0011V50 Magnetic LED Lamp
For illuminating dark working areas Attachment to tool by means of strong magnets Very compact dimensions Approx. 24 hours of lighting, with 2 replaceable button cells (CR1220) Snap-hook fastening Impact-resistant plastic housing
US$9.63 *
Knipex 9042340 Punch Lock Riveter burnished with multi-component grips 340 mm Knipex 9042340 Punch Lock Riveter burnished...
To join metal section sheets used in dry walling with a lock seam For U- and C-shaped sections with max 1.2 mm metal (2 x 0.6 mm) Minimum handforce required due to optimum lever transmission Pliers body: special tool steel, rolled,...
US$114.00 *
Knipex 001108 Pen-Style Profi-Key for all standard shut-off systems 145 mm Knipex 001108 Pen-Style Profi-Key for all...
Easy to carry pen-style control cabinet key with fastening clip Three different key profiles can be utilised by swivelling the key holder Multi-purpose wrench for access on construction sites with profiles for the areas of heating, air...
US$26.59 *
Knipex 7881125 Electronic Super Knips® burnished with multi-component grips 125 mm Knipex 7881125 Electronic Super Knips®...
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics Ground, very sharp cutting edges without bevel for flush cutting Precision shaped tips cut wires resting on a board from 0.2 mm dia. Joint with...
US$25.22 *
Knipex 922762 Precision Tweezers insulated 150 mm Knipex 922762 Precision Tweezers insulated 150 mm
Tested according IEC 60900 With dipped insulation Nickel plated Spring steel, high-strength Straight pattern Gripping surfaces with fine transverse serration
US$25.29 *
Knipex 8806250 KNIPEX Alligator® chrome plated 250 mm Knipex 8806250 KNIPEX Alligator® chrome plated...
More output and comfort compared to conventional water pump pliers of the same length: 9-notch adjustment positioning for 30 % more gripping capacity Good access to the workpiece due to slim size of head and joint area Self-locking on...
US$39.39 *
Knipex 7372180F KNIPEX TwinForce® black atramentized 180 mm Knipex 7372180F KNIPEX TwinForce® black...
The superior High-Leverage Diagonal Cutter with patented double joint Ideal transmission of force due to double-hinged design Reliably cuts all types of wire, including steel tape For rough or very fine cutting Low cutting impact: gentle...
US$70.92 *
Knipex 2001180 Flat Nose Pliers black atramentized plastic coated 180 mm Knipex 2001180 Flat Nose Pliers black...
Flat, short, wide jaws Knurled gripping surfaces Chrome vanadium electric steel, forged, oil-hardened
US$20.35 *
Knipex 1211180 Insulation Stripper black lacquered 180 mm Knipex 1211180 Insulation Stripper black...
With replaceable blades for 4 or 6 different conductor cross-sections Leave wire undamaged thanks to precision-ground blade shapes, even multi-stranded conductors are stripped gently During stripping, the wire is held firmly by clamping...
US$70.46 *
Knipex 1262180 Automatic Insulation Stripper 180 mm Knipex 1262180 Automatic Insulation Stripper...
Compact standard tool at a favourable price for all current cable cross-sections and insulating materials For single, multiple and fine stranded cables of 0.2 up to 6.0 mm² with standard insulation Adapts automatically to the respective...
US$47.16 *
Knipex 9579445 Spare cutter head for 95 71 445 Knipex 9579445 Spare cutter head for 95 71 445
For wire ropes and steel rods, copper and aluminium cables Suitable for cutting overhead cables with strain relief wire (ACSR-cables) Angular cutting blades allow cutting of single rope wire Optimum transmission ratio for high cutting...
US$189.78 *
Knipex 3422130ESD Precision Electronics Gripping Pliers ESD burnished 135 mm Knipex 3422130ESD Precision Electronics...
For very precise assembly work, e.g. in electronics and fine mechanics For gripping, holding and bending Electrically discharging handles - dissipative Smoothly ground gripping surfaces, edges finely rounded Approx. 20 % lighter than...
US$52.26 *
Knipex 8559250A Spare parts assortment grip inserts, for 85 51 250 A Knipex 8559250A Spare parts assortment grip...
Rotatable, universal grip inserts for reliably gripping the clamps in all positions Extremely good leverage which allows clamps to be opened easily without great effort Quick-set adjustment: adjusts by shifting directly onto the...
US$19.31 *
Knipex 2201140 Round Nose Pliers black atramentized plastic coated 140 mm Knipex 2201140 Round Nose Pliers black...
For bending wire loops Round, short jaws- finely ground Chrome vanadium electric steel, forged, oil-hardened
US$15.41 *
Knipex 980517 Nut Driver with T-handle 300 mm Knipex 980517 Nut Driver with T-handle 300 mm
Special tool steel, oil-hardened
US$39.85 *
Knipex 3532115ESD Electronics Pliers ESD with multi-component grips 115 mm Knipex 3532115ESD Electronics Pliers ESD with...
Precision pliers for fine assembly work, e g. in electronics and fine mechanics For gripping, holding and bending Electrically discharging handles - dissipative Sturdy, zero backlash box joint Smooth ground gripping surfaces Edges...
US$36.99 *
Knipex 8805300 KNIPEX Alligator® chrome plated 300 mm Knipex 8805300 KNIPEX Alligator® chrome plated...
More output and comfort compared to conventional water pump pliers of the same length: 9-notch adjustment positioning for 30 % more gripping capacity Good access to the workpiece due to slim size of head and joint area Self-locking on...
US$48.23 *
Knipex 4911A3 Precision Circlip Pliers grey atramentized 225 mm Knipex 4911A3 Precision Circlip Pliers grey...
With inserted tips for reliable work Heavy duty in continuous operation: up to 10 times longer service life compared to turned tips Large contact faces on the tips: no distortion of circlips, easy fitting Bolted joint: precise, zero...
US$24.96 *
Knipex 982025 Screwdrivers for slotted screws 177 mm Knipex 982025 Screwdrivers for slotted screws...
Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force Handle design prevents rolling Chrome vanadium molybdenum steel
US$7.03 *
Knipex 1391200 Pliers for Electrical Installation black atramentized plastic coated 200 mm Knipex 1391200 Pliers for Electrical...
Multifunctional pliers for the electrical installation- to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping end sleeves (ferrules) 6 functions in one pair of pliers Smooth surfaces near the tips...
US$55.18 *
Knipex 980014 Open-end wrench Knipex 980014 Open-end wrench
Jaw 15° angled Basic tool chrome plated Chrome vanadium steel, forged, oil-hardened
US$20.49 *
Knipex 8330020 Pipe Wrench S-Type red powder-coated 540 mm Knipex 8330020 Pipe Wrench S-Type red...
Slim, S-type jaw Jaws with offset teeth in opposite direction Teeth additionally induction hardened Three-point contact on pipes, self-locking I-beam handle design Captive adjusting nut Red powder coated, jaws bright ground Chrome...
US$103.74 *
Knipex 4611A0 Circlip Pliers black atramentized 140 mm Knipex 4611A0 Circlip Pliers black atramentized...
For fitting circlips on shafts, range of application from 3 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$16.90 *
Knipex 121212 Precision Insulation Stripper burnished 195 mm Knipex 121212 Precision Insulation Stripper...
Form-fit stripping also of difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber- multi-layer too A second pair of blades holds the remaining insulation reliably in place Replaceable shaped blade...
US$141.30 *
Knipex 980022 Open-end wrench Knipex 980022 Open-end wrench
Jaw 15° angled Basic tool chrome plated Chrome vanadium steel, forged, oil-hardened
US$28.29 *
Knipex 4613A2 Circlip Pliers chrome plated 180 mm Knipex 4613A2 Circlip Pliers chrome plated 180 mm
For fitting circlips on shafts, range of application from 3 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$22.95 *
Knipex 7932125 Precision Electronics Diagonal Cutter burnished 125 mm Knipex 7932125 Precision Electronics Diagonal...
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics Very precisely ground and sharp cutting edges with very small bevels for exact cutting on delicate electronic components- also available without bevel...
US$55.90 *
Knipex 975308 Self-Adjusting Crimping Pliers for End Sleeves (ferrules) burnished 190 mm Knipex 975308 Self-Adjusting Crimping Pliers...
For crimping end sleeves (ferrules) according to DIN 46228 parts 1 + 4 Self-adjusting adaptation to the desired end sleeve (ferrule) size: no wrong crimps caused by using the wrong die Fits all twin- ferrules within the application range...
US$196.94 *
Knipex 7221160 Diagonal Cutter for plastics plastic coated 160 mm Knipex 7221160 Diagonal Cutter for plastics...
Cutting face flush ground For nearly flush cutting of moulded plastic components from sprues Cuts soft materials such as lead in a flush cut With opening spring Vanadium electric steel- forged, oil-hardened
US$47.84 *
Knipex 98373/8" Hexagon Socket for hexagonal screws with internal square 3/8" Knipex 98373/8" Hexagon Socket for hexagonal...
For metric and imperial hexagonal head screws Basic tool chrome plated Chrome Vanadium steel
US$19.31 *
Knipex 8701150 KNIPEX Cobra® grey atramentized 150 mm Knipex 8701150 KNIPEX Cobra® grey atramentized...
Push the button for adjustment on the workpiece Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width Self-locking on pipes and nuts: no slipping on the workpiece and low handforce...
US$26.85 *
Knipex 9910300 High Leverage Concreters' Nipper black atramentized 300 mm Knipex 9910300 High Leverage Concreters' Nipper...
25 % less effort required compared to conventional concreters' nippers of the same size Extra-slim form for tying deep mounted steel rods To lace concrete reinforcing steel with binding wire from a roll Wire is twisted and cut in a...
US$28.60 *
Knipex 002017 Case for Electronics Pliers for working on electronic components Knipex 002017 Case for Electronics Pliers for...
Case made of hard-wearing polyester fabric, pliers are held by elastic band, zippered 6 parts, contains 6 ESD electronics pliers, electrically discharging version
US$302.04 *
Knipex 4410J6 Circlip Pliers black powder-coated 580 mm Knipex 4410J6 Circlip Pliers black...
For assembling circlips into bores within the range of Ø 122 - 400 mm With locking device, can be released With replaceable tips made of tempered steel Black powder coated Pliers body: rolled steel, high-strength Tips: special tool...
US$147.61 *
Knipex 982504 Screwdriver for cross recessed screws Pozidriv® 320 mm Knipex 982504 Screwdriver for cross recessed...
Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force Handle design prevents rolling Chrome vanadium molybdenum steel
US$20.61 *
Knipex 7141200 KNIPEX CoBolt® black atramentized 200 mm Knipex 7141200 KNIPEX CoBolt® black...
Precision cutting edges for soft and hard wire as well as piano wire Cuts bolts, nails, rivets, etc. up to 5.2 mm dia. Most efficient joint design ensures exceptional cutting performance Cutting edges additionally induction hardened,...
US$56.94 *
Knipex 8726250 KNIPEX Cobra® VDE chrome plated 250 mm Knipex 8726250 KNIPEX Cobra® VDE chrome plated...
Adjustment by shifting one jaw directly on to the workpiece: fast, reliable and comfortable handling Opening at the touch of a button apart form the workpiece Fine adjustment for optimum adaptation to different sizes of workpieces and a...
US$50.18 *
Knipex 4621A21 Circlip Pliers black atramentized 170 mm Knipex 4621A21 Circlip Pliers black...
For fitting circlips on shafts, range of application from 3 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$19.18 *
Knipex 8703250 KNIPEX Cobra® chrome plated 250 mm Knipex 8703250 KNIPEX Cobra® chrome plated 250 mm
Push the button for adjustment on the workpiece Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width Self-locking on pipes and nuts: no slipping on the workpiece and low handforce...
US$39.91 *
Knipex 1561160 Insulation Stripper plastic coated 160 mm Knipex 1561160 Insulation Stripper plastic...
For stripping thin cables Accurate boring to match diameter of wire, precise stripping prism- non-adjustable With opening spring Chrome vanadium electric steel, forged, oil-hardened
US$35.57 *
Knipex 1280100SB Mini Stripping Tool 100 mm Knipex 1280100SB Mini Stripping Tool 100 mm
Precise stripping, stepwise adjustment to the conductor diameters With wire cutter Adjustable length stop from 4.0 - 15.0 mm With locking device Housing: plastic, impact-proof For thin copper conductors dia. 0.3 to 1.0 mm
US$50.44 *
Knipex 4623A11 Circlip Pliers chrome plated 125 mm Knipex 4623A11 Circlip Pliers chrome plated 125 mm
For fitting circlips on shafts, range of application from 3 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$22.17 *
Knipex 121213 Precision Insulation Stripper burnished 195 mm Knipex 121213 Precision Insulation Stripper...
Form-fit stripping also of difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber- multi-layer too A second pair of blades holds the remaining insulation reliably in place Replaceable shaped blade...
US$141.30 *
Knipex 0202200 High Leverage Combination Pliers black atramentized 200 mm Knipex 0202200 High Leverage Combination Pliers...
35 % less effort required than with conventional combination pliers With cutting edges (hardness approx. 63 HRC) for heavy duty Easier work due to optimised leverage Easier cutting, powerful gripping, bending and pulling Long cutting...
US$25.61 *
Knipex 2502160 Snipe Nose Side Cutting Pliers black atramentized 160 mm Knipex 2502160 Snipe Nose Side Cutting Pliers...
Suitable for finer gripping and cutting work Pointed, half-round jaws Knurled gripping surfaces With cutting edges for soft, medium-hard and hard wire Cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC...
US$22.05 *
Knipex 98001/2" Open-end wrench Knipex 98001/2" Open-end wrench
Jaw 15° angled Basic tool chrome plated Chrome vanadium steel, forged, oil-hardened
US$21.58 *
Knipex 4623A31 Circlip Pliers chrome plated 200 mm Knipex 4623A31 Circlip Pliers chrome plated 200 mm
For fitting circlips on shafts, range of application from 3 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$26.73 *
Knipex 7402250 High Leverage Diagonal Cutter black atramentized 250 mm Knipex 7402250 High Leverage Diagonal Cutter...
For very tough, continuous use High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio Precision cutting edges additionally induction hardened (cutting edge hardness...
US$40.63 *
Knipex 985303 Dismantling Knife for round cables 155 mm Knipex 985303 Dismantling Knife for round...
Ergonomically improved handle shape with comfortable slip guard Particularly confident grip thanks to slip-proof soft components Thumb recess and "finger hook" at the end of the handle ensure a good transmission of force when the blade...
US$14.25 *
Knipex 7902125 Precision Electronics Diagonal Cutter burnished 125 mm Knipex 7902125 Precision Electronics Diagonal...
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics Very precisely ground and sharp cutting edges with very small bevels for exact cutting on delicate electronic components- also available without bevel...
US$55.90 *
Knipex 3622125 Electronics  Mounting  Pliers with multi-component grips 125 mm Knipex 3622125 Electronics Mounting Pliers...
Precision pliers for very fine assembly and repair work in electronics For bending and cutting off wire ends on components Sturdy, zero backlash box joint Smooth ground gripping surfaces Edges carefully deburred Low-friction double...
US$64.60 *
Knipex 4811J2 Precision Circlip Pliers grey atramentized 180 mm Knipex 4811J2 Precision Circlip Pliers grey...
With inserted tips for reliable work Heavy duty in continuous operation: up to 10 times longer service life compared to turned tips Bolted joint: precise, zero backlash operation of pliers Non-slip plastic coating on the handles Pliers...
US$20.09 *
Knipex 4611G0 Circlip Pliers for grip rings on shafts black atramentized plastic coated 140 mm Knipex 4611G0 Circlip Pliers for grip rings on...
For fitting grip rings on shafts from 1.5 - 30 mm dia. With opening spring Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened For rings of 1.5 - 4.0 mm dia., with adjustable stop...
US$29.71 *
Knipex 982040 Screwdrivers for slotted screws 202 mm Knipex 982040 Screwdrivers for slotted screws...
Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force Handle design prevents rolling Chrome vanadium molybdenum steel
US$8.19 *
Knipex 973301 KNIPEX MultiCrimp® burnished 250 mm Knipex 973301 KNIPEX MultiCrimp® burnished 250 mm
Just one tool for the most common crimping applications Crimping dies changed quickly and easily without any additional tool Sorted and protected storage of the interchangeable dies in a round magazine Comfortable, powerful crimping...
US$249.13 *
Knipex 4621A41 Circlip Pliers black atramentized 300 mm Knipex 4621A41 Circlip Pliers black...
For fitting circlips on shafts, range of application from 3 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$36.34 *
Knipex 8702250 KNIPEX Cobra® grey atramentized 250 mm Knipex 8702250 KNIPEX Cobra® grey atramentized...
Push the button for adjustment on the workpiece Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width Self-locking on pipes and nuts: no slipping on the workpiece and low handforce...
US$33.61 *
Knipex 1685125SB Universal Dismantling Tool 125 mm Knipex 1685125SB Universal Dismantling Tool 125 mm
For dismantling and stripping all common round and damp-proof installation cables between 8.0 - 13.0 mm dia. (e.g. 3 x 1.5 mm² up to 5 x 2.5 mm²) Also for use in conduit and distribution boxes Double shell, folding back stripping tool...
US$47.19 *
Knipex 3303160 Duckbill Pliers chrome plated plastic coated 160 mm Knipex 3303160 Duckbill Pliers chrome plated...
Duckbill shaped jaws 9 mm wide at the tip and tapering to 1.5 mm thickness Smooth gripping surfaces Chrome vanadium electric steel, forged, oil-hardened
US$36.14 *
Knipex 9803055 Nut Driver with screwdriver handle 232 mm Knipex 9803055 Nut Driver with screwdriver...
Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force Handle design prevents rolling Chrome vanadium molybdenum steel
US$15.60 *
Knipex 4621A11 Circlip Pliers black atramentized 125 mm Knipex 4621A11 Circlip Pliers black...
For fitting circlips on shafts, range of application from 3 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$17.49 *
Knipex 3016160 Long Nose Pliers chrome plated 160 mm Knipex 3016160 Long Nose Pliers chrome plated...
Heavy duty and wear resisting Different jaw styles Chrome vanadium electric steel, forged, oil-hardened
US$29.97 *
Knipex 0305200 Combination Pliers chrome plated with multi-component grips 200 mm Knipex 0305200 Combination Pliers chrome plated...
With gripping zones for flat and round material, suitable for versatile use With cutting edges for soft and hard wire Long cutting edges for thicker cables Cutting edges additionally induction hardened, cutting edge hardness approx. 60...
US$27.30 *
Knipex 3025140 Long Nose Pliers chrome plated with multi-component grips 140 mm Knipex 3025140 Long Nose Pliers chrome plated...
Heavy-duty and hard-wearing gripping pliers Different jaw styles Chrome vanadium electric steel, forged, oil-hardened
US$26.07 *
Knipex 6212120 Electronics Oblique Cutting Nipper with multi-component grips 120 mm Knipex 6212120 Electronics Oblique Cutting...
With cutting edges for soft and medium hard wire Without bevel, for flush cutting Cutting edges additionally induction hardened, cutting edge hardness approx. 58 HRC Low-friction double spring for gentle and even opening Sturdy, zero...
US$40.16 *
Knipex 920879ESD Precision Tweezers ESD 120 mm Knipex 920879ESD Precision Tweezers ESD 120 mm
Chrome nickel steel: stainless, anti-magnetic (18/10), very popular electronics quality ESD coating: non-reflective black, with a surface resistance of approx. 10^5 Ohm Tips non-reflective brushed Gripping surfaces matt finished for...
US$22.62 *
Knipex 2201160 Round Nose Pliers black atramentized plastic coated 160 mm Knipex 2201160 Round Nose Pliers black...
For bending wire loops Round, short jaws- finely ground Chrome vanadium electric steel, forged, oil-hardened
US$15.86 *
Knipex 973906 Crimping dies for insulated terminals, plug connectors and butt connectors Knipex 973906 Crimping dies for insulated...
Just one tool for the most common crimping applications Crimping dies changed quickly and easily without any additional tool Sorted and protected storage of the interchangeable dies in a round magazine Comfortable, powerful crimping...
US$65.64 *
Knipex 7952125ESD Precision Electronics Side Cutter ESD burnished 125 mm Knipex 7952125ESD Precision Electronics Side...
Electrically discharging handles - dissipative Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics Very precisely ground and sharp cutting edges with very small bevels for exact cutting on delicate...
US$65.51 *
Knipex 975213 Crimping Pliers burnished 250 mm Knipex 975213 Crimping Pliers burnished 250 mm
For solder-free electrical connections The ingenious lever transmission reduces the handforce up to 30% compared with regular crimping pliers Repetitive, high crimping quality due to precision dies and integral lock (self-releasing...
US$160.22 *
Knipex 981330 Screwdriver for hexagon socket screws 182 mm Knipex 981330 Screwdriver for hexagon socket...
Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force Handle design prevents rolling Chrome vanadium molybdenum steel
US$8.84 *
Knipex 0307200 Combination Pliers chrome plated with dipped insulation, VDE-tested 200 mm Knipex 0307200 Combination Pliers chrome plated...
With gripping zones for flat and round material, suitable for versatile use With cutting edges for soft and hard wire Long cutting edges for thicker cables Cutting edges additionally induction hardened, cutting edge hardness approx. 60...
US$37.18 *
Knipex 0302180 Combination Pliers black atramentized with multi-component grips 180 mm Knipex 0302180 Combination Pliers black...
With gripping zones for flat and round material, suitable for versatile use With cutting edges for soft and hard wire Long cutting edges for thicker cables Cutting edges additionally induction hardened, cutting edge hardness approx. 60...
US$19.11 *
Knipex 0302160 Combination Pliers black atramentized with multi-component grips 160 mm Knipex 0302160 Combination Pliers black...
With gripping zones for flat and round material, suitable for versatile use With cutting edges for soft and hard wire Long cutting edges for thicker cables Cutting edges additionally induction hardened, cutting edge hardness approx. 60...
US$18.79 *
Knipex 980124 Box Wrench Knipex 980124 Box Wrench
Cranked Basic tool chrome plated Chrome vanadium steel, forged, oil-hardened
US$41.41 *
Knipex 8607250 Pliers Wrench insulated nickel plated with dipped insulation, VDE-tested 250 mm Knipex 8607250 Pliers Wrench insulated nickel...
Pliers and a wrench in a single tool Also excellent for gripping, holding, pressing and bending workpieces Zero backlash jaw pressure prevents damage to edges of sensitive and soft nuts (Cu) With scale for presetting the opening width...
US$82.36 *
Knipex 4911A0 Precision Circlip Pliers grey atramentized 140 mm Knipex 4911A0 Precision Circlip Pliers grey...
With inserted tips for reliable work Heavy duty in continuous operation: up to 10 times longer service life compared to turned tips Large contact faces on the tips: no distortion of circlips, easy fitting Bolted joint: precise, zero...
US$22.05 *
Knipex 7813125ESD Electronic Super Knips® ESD with multi-component grips 125 mm Knipex 7813125ESD Electronic Super Knips® ESD...
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics Electrically discharging handles - dissipative Ground, very sharp cutting edges without bevel for flush cutting Precision shaped tips cut wires resting...
US$27.89 *
Knipex 3041160 Halogen Bulb Exchange Pliers black atramentized plastic coated 160 mm Knipex 3041160 Halogen Bulb Exchange Pliers...
For the installation of wedge base bulbs Gripping surfaces plastic coated Chrome vanadium electric steel, forged, oil-hardened
US$39.59 *
Knipex 7112200 KNIPEX CoBolt® black atramentized 200 mm Knipex 7112200 KNIPEX CoBolt® black...
Precision cutting edges for soft and hard wire as well as piano wire Cuts bolts, nails, rivets, etc. up to 5.2 mm dia. Most efficient joint design ensures exceptional cutting performance Cutting edges additionally induction hardened,...
US$50.12 *
Knipex 8501250 KNIPEX SmartGrip® grey atramentized 250 mm Knipex 8501250 KNIPEX SmartGrip® grey...
Ideal for frequent changeovers to workpieces of different sizes Automatic adjustment per one-hand operation both for right-handed and left-handed use Good access to the workpiece thanks to the slim dimensions of head and joint area and...
US$51.22 *
Knipex 4911A1 Precision Circlip Pliers grey atramentized 140 mm Knipex 4911A1 Precision Circlip Pliers grey...
With inserted tips for reliable work Heavy duty in continuous operation: up to 10 times longer service life compared to turned tips Large contact faces on the tips: no distortion of circlips, easy fitting Bolted joint: precise, zero...
US$20.61 *
Knipex 9151160 Glass Nibbling Pincer black atramentized plastic coated 160 mm Knipex 9151160 Glass Nibbling Pincer black...
For breaking off narrow strips of glass to a scored line For finishing off glass edges to required profile Special tool steel, forged, oil-hardened
US$19.18 *
Knipex 980417 Nut Driver with T-handle 200 mm Knipex 980417 Nut Driver with T-handle 200 mm
Special tool steel, oil-hardened
US$33.54 *
Knipex 7702120HESD Electronics Diagonal Cutter ESD 120 mm Knipex 7702120HESD Electronics Diagonal Cutter...
For extreme demands on cutting pliers caused by hard or tough materials, e.g. piano, nickel, tungsten and diode wire, such as those used more frequently in the electronics and aerospace industries Always the right cutting tool, even with...
US$124.61 *
Knipex 2002160 Flat Nose Pliers black atramentized with multi-component grips 160 mm Knipex 2002160 Flat Nose Pliers black...
Flat, short, wide jaws Knurled gripping surfaces Chrome vanadium electric steel, forged, oil-hardened
US$18.66 *
Knipex 4613A0 Circlip Pliers chrome plated 140 mm Knipex 4613A0 Circlip Pliers chrome plated 140 mm
For fitting circlips on shafts, range of application from 3 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$21.13 *
Knipex 980019 Open-end wrench Knipex 980019 Open-end wrench
Jaw 15° angled Basic tool chrome plated Chrome vanadium steel, forged, oil-hardened
US$26.33 *
Knipex 980119 Box Wrench Knipex 980119 Box Wrench
Cranked Basic tool chrome plated Chrome vanadium steel, forged, oil-hardened
US$32.97 *
Knipex 9749662 Set of Mounting Tools for solar cable connectors MC4 (Multi-Contact) 115 mm Knipex 9749662 Set of Mounting Tools for solar...
Set of two mounting tools To tighten cable glands of MC4 solar plugs To open the locking of MC4 housings (even in case of mounted lock clip) Tool: plastic, fibreglass reinforced
US$9.88 *
Knipex 7011110 Diagonal Cutter black atramentized plastic coated 110 mm Knipex 7011110 Diagonal Cutter black...
The indispensable diagonal cutter for all-round use High quality material and precise workmanship for long service life Precision cutting edges for soft and hard wire Clean cutting of thin copper wires, also at the cutting-edge tips...
US$24.25 *
Knipex 98007/16" Open-end wrench Knipex 98007/16" Open-end wrench
Jaw 15° angled Basic tool chrome plated Chrome vanadium steel, forged, oil-hardened
US$20.22 *
Knipex 5000180 Carpenters' Pincers black atramentized 180 mm Knipex 5000180 Carpenters' Pincers black...
For heaviest duty Specially favoured by craftsmen for their precise workmanship Extreme wear resistance and well balanced Cutting edges additionally hardened- cutting edge hardness approx. 60 HRC Special tool steel, forged, oil-hardened
US$15.34 *
Knipex 984722 Hexagon Socket for hexagonal screws with internal square 1/2" Knipex 984722 Hexagon Socket for hexagonal...
For metric and imperial hexagonal head screws Basic tool chrome plated Chrome Vanadium steel
US$25.09 *
Knipex 2525160 Snipe Nose Side Cutting Pliers chrome plated 160 mm Knipex 2525160 Snipe Nose Side Cutting Pliers...
Suitable for finer gripping and cutting work Pointed, half-round jaws Knurled gripping surfaces With cutting edges for soft, medium-hard and hard wire Cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC...
US$29.58 *
Knipex 975208 Crimping Pliers burnished 250 mm Knipex 975208 Crimping Pliers burnished 250 mm
For solder-free electrical connections The ingenious lever transmission reduces the handforce up to 30% compared with regular crimping pliers Repetitive, high crimping quality due to precision dies and integral lock (self-releasing...
US$153.13 *
Knipex 980116 Box Wrench Knipex 980116 Box Wrench
Cranked Basic tool chrome plated Chrome vanadium steel, forged, oil-hardened
US$30.23 *
Knipex 7406160 High Leverage Diagonal Cutter chrome plated 160 mm Knipex 7406160 High Leverage Diagonal Cutter...
With integrated forged axle for heaviest duty Suitable for all types of wire including piano wire High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio Precision...
US$39.33 *
Knipex 9914250 High Leverage Concreters' Nipper high lever transmission nickel plated 250 mm Knipex 9914250 High Leverage Concreters' Nipper...
25 % less effort required compared to conventional concreters' nippers of the same size Extra-slim form for tying deep mounted steel rods To lace concrete reinforcing steel with binding wire from a roll Wire is twisted and cut in a...
US$25.48 *
Knipex 975219 Crimping Pliers burnished 250 mm Knipex 975219 Crimping Pliers burnished 250 mm
For solder-free electrical connections The ingenious lever transmission reduces the handforce up to 30% compared with regular crimping pliers Repetitive, high crimping quality due to precision dies and integral lock (self-releasing...
US$195.57 *
Knipex 8330030 Pipe Wrench S-Type red powder-coated 680 mm Knipex 8330030 Pipe Wrench S-Type red...
Slim, S-type jaw Jaws with offset teeth in opposite direction Teeth additionally induction hardened Three-point contact on pipes, self-locking I-beam handle design Captive adjusting nut Red powder coated, jaws bright ground Chrome...
US$193.94 *
Knipex 983905 Hexagon Socket for hexagonal socket screws with internal square 3/8" 75 mm Knipex 983905 Hexagon Socket for hexagonal...
For metric internal hexagonal head screws Basic tool chrome plated Special tool steel
US$39.07 *
Knipex 986530 Self-Clamping Slip-On Cap 110 mm Knipex 986530 Self-Clamping Slip-On Cap 110 mm
To cover bare live cable ends Plastic
US$10.92 *
Knipex 4621A01 Circlip Pliers black atramentized 125 mm Knipex 4621A01 Circlip Pliers black...
For fitting circlips on shafts, range of application from 3 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$18.46 *
Knipex 980013 Open-end wrench Knipex 980013 Open-end wrench
Jaw 15° angled Basic tool chrome plated Chrome vanadium steel, forged, oil-hardened
US$20.22 *
Knipex 124903 Spare length stop for 12 40 200 Knipex 124903 Spare length stop for 12 40 200
For single, multiple and fine stranded conductors with plastic or rubber insulation Adapts automatically to the respective cable cross-section- prevents damage to the conductor Cutting depth can be adjusted for different insulation...
US$2.73 *
Knipex 7001110 Diagonal Cutter black atramentized plastic coated 110 mm Knipex 7001110 Diagonal Cutter black...
The indispensable diagonal cutter for all-round use High quality material and precise workmanship for long service life Precision cutting edges for soft and hard wire Clean cutting of thin copper wires, also at the cutting-edge tips...
US$18.59 *
Knipex 1664125SB Dismantling Tool for flat and round cables 125 mm Knipex 1664125SB Dismantling Tool for flat and...
For flat cables up to 12 mm in width For dismantling and stripping all common round and damp-proof installation cables Ø 4.0 to 13.0 mm (e.g. NYM cable 3 x 1.5 mm² up to 5 x 2.5 mm²) Stripping device for cross-sections 0.8 / 1.5 / 2.5...
US$27.37 *
Knipex 7407250 High Leverage Diagonal Cutter chrome plated 250 mm Knipex 7407250 High Leverage Diagonal Cutter...
With integrated forged axle for heaviest duty Suitable for all types of wire including piano wire High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio Precision...
US$61.48 *
Knipex 3021160 Long Nose Pliers black atramentized plastic coated 160 mm Knipex 3021160 Long Nose Pliers black...
Heavy-duty and hard-wearing gripping pliers Different jaw styles Chrome vanadium electric steel, forged, oil-hardened
US$19.63 *
Knipex 7902120ESD Precision Electronics Side Cutter ESD burnished 120 mm Knipex 7902120ESD Precision Electronics Side...
Electrically discharging handles - dissipative Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics Very precisely ground and sharp cutting edges with very small bevels for exact cutting on delicate...
US$59.74 *
Knipex 4613A1 Circlip Pliers chrome plated 140 mm Knipex 4613A1 Circlip Pliers chrome plated 140 mm
For fitting circlips on shafts, range of application from 3 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$19.97 *
Knipex 4431J12 Circlip Pliers black atramentized 140 mm Knipex 4431J12 Circlip Pliers black...
For fitting circlips into bores, range of application from 8 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$16.77 *
Knipex 973905 Crimping dies Knipex 973905 Crimping dies
Just one tool for the most common crimping applications Crimping dies changed quickly and easily without any additional tool Sorted and protected storage of the interchangeable dies in a round magazine Comfortable, powerful crimping...
US$65.64 *
Knipex 923875ESD Precision Tweezers ESD 120 mm Knipex 923875ESD Precision Tweezers ESD 120 mm
Chrome nickel steel: stainless, anti-magnetic (18/10), very popular electronics quality ESD coating: non-reflective black, with a surface resistance of approx. 10^5 Ohm Tips non-reflective brushed Gripping surfaces matt finished for...
US$22.49 *
Knipex 922207 Precision Tweezers pointed shape 115 mm Knipex 922207 Precision Tweezers pointed shape...
For fine mounting work Straight pattern Smooth gripping surfaces Particularly slim tips Non-reflective matt finished Stainless, anti-magnetic and acid-proof
US$17.75 *
Knipex 4413J4 Circlip Pliers chrome plated 320 mm Knipex 4413J4 Circlip Pliers chrome plated 320 mm
For fitting circlips into bores, range of application from 8 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$36.00 *
Knipex 1901130 Round Nose Pliers with cutting edge black atramentized 130 mm Knipex 1901130 Round Nose Pliers with cutting...
For gripping and manipulating fine wires, e.g. in jewellery work Ideal for cutting and bending activities, also in electronics For bending wire loops Precision-ground round jaws with fine, pointed tips Cutting edges additionally...
US$29.76 *
Knipex 2925160 (Telephone Pliers) chrome plated with multi-component grips 160 mm Knipex 2925160 (Telephone Pliers) chrome plated...
Gripping surfaces cross-hatched, knurled Chrome vanadium electric steel, forged, oil-hardened
US$29.71 *
Knipex 4510170 Special Retaining Ring Pliers for retaining rings on shafts burnished 170 mm Knipex 4510170 Special Retaining Ring Pliers...
For fitting horseshoe-shaped spring retaining rings and circlips without grip holes For shaft retaining devices With opening spring Chrome vanadium electric steel, forged, oil-hardened For retaining rings with a minimum ring split gap of...
US$41.67 *
Knipex 3831200 Mechanics' Pliers black atramentized plastic coated 200 mm Knipex 3831200 Mechanics' Pliers black...
High bending strength of the pliers jaws/tips Gripping surfaces cross-hatched, knurled Vanadium electric steel- forged, oil-hardened
US$30.62 *
Knipex 2613200 Snipe Nose Side Cutting Pliers chrome plated 200 mm Knipex 2613200 Snipe Nose Side Cutting Pliers...
Elastic tips: dimensionally stable even when twisted Distortion-tolerant, elastic precision tips Half-round, long, pointed jaws With cutting edges (hardness approx. 61 HRC) for soft, medium-hard and hard wire Vanadium electric steel-...
US$30.10 *
Knipex 002009V01 Bestseller-Set Knipex 002009V01 Bestseller-Set
Tools in a plastic deep-drawn tray with transparent lid Attractive sales packaging with Euro standard perforation Dimensions (W x H x D): 170 x 370 x 40 mm Material: sturdy cardboard packaging, printed Pliers with polished heads- handles...
US$72.79 *
Knipex 9854 Cable Knife 180 mm Knipex 9854 Cable Knife 180 mm
Ergonomically improved handle shape with comfortable slip guard Particularly confident grip thanks to slip-proof soft components Thumb recess and "finger hook" at the end of the handle ensure a good transmission of force when the blade...
US$15.47 *
Knipex 922870ESD Precision Tweezers ESD 110 mm Knipex 922870ESD Precision Tweezers ESD 110 mm
Chrome nickel steel: stainless, anti-magnetic (18/10), very popular electronics quality ESD coating: non-reflective black, with a surface resistance of approx. 10^5 Ohm Tips non-reflective brushed Gripping surfaces matt finished for...
US$18.98 *
Knipex 7172910 Bolt Cutter with multi-component grips 910 mm Knipex 7172910 Bolt Cutter with multi-component...
Cutting capacity up to 48 HRC hardness Robust cutting edges are additionally induction hardened, cutting-edge hardness approx. 62 HRC Forged-in stopper with comfortable shock- absorber Good access due to very flat construction of head...
US$220.28 *
Knipex 3432130 Precision Electronics Gripping Pliers burnished 135 mm Knipex 3432130 Precision Electronics Gripping...
For very precise assembly work, e.g. in electronics and fine mechanics For gripping, holding and bending Smoothly ground gripping surfaces, edges finely rounded Approx. 20 % lighter than conventional electronics pliers Bolted joint and...
US$49.99 *
Knipex 002004SB Precision Circlip Pliers Set Knipex 002004SB Precision Circlip Pliers Set
Attractive sales packaging with Euro standard perforation Contains common Precision Circlip Pliers for highest requirements Sturdy plastic packaging, also suitable for storage of the pliers 8 parts
US$182.05 *
Knipex 4004250 Universal Grip Pliers nickel plated 250 mm Knipex 4004250 Universal Grip Pliers nickel...
Hold round, profile and flat material securely Heavy duty model With adjustment screw and release lever One-hand operation High clamping pressure due to toggle lever action Pliers body: rolled steel, high-strength Gripping jaws: chrome...
US$27.30 *
Knipex 9778180 Crimping Pliers for end sleeves (ferrules) 180 mm Knipex 9778180 Crimping Pliers for end sleeves...
For crimping end sleeves (ferrules) according DIN 46228 parts 1 + 4 from 0.25 to 16 mm² Improved leverage for 30% easier crimping More light and slim design Crimping in marked half-round dies for reliable connections between the sleeve...
US$43.03 *
Knipex 3015160 Long Nose Pliers chrome plated with multi-component grips 160 mm Knipex 3015160 Long Nose Pliers chrome plated...
Heavy-duty and hard-wearing gripping pliers Different jaw styles Chrome vanadium electric steel, forged, oil-hardened
US$27.25 *
Knipex 983325 Torque Wrench with driving square 3/8", reversible 290 mm Knipex 983325 Torque Wrench with driving square...
Reversible for tightening of lefthanded threads Lockable torque adjustment Very reliable retention of the actuating tools ensured by mechanically locked retaining system Transparent insulated scale range Calibration certificate included...
US$372.29 *
Knipex 984710 Hexagon Socket for hexagonal screws with internal square 1/2" Knipex 984710 Hexagon Socket for hexagonal...
For metric and imperial hexagonal head screws Basic tool chrome plated Chrome Vanadium steel
US$19.05 *
Knipex 982610 Screwdriver for Torx® screws 160 mm Knipex 982610 Screwdriver for Torx® screws 160 mm
Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force Handle design prevents rolling Chrome vanadium molybdenum steel
US$8.53 *
Knipex 984905 Hexagon Socket for hexagonal socket screws with internal square 1/2" 75 mm Knipex 984905 Hexagon Socket for hexagonal...
For metric internal hexagonal head screws Basic tool chrome plated Special tool steel
US$34.39 *
Knipex 2001140 Flat Nose Pliers black atramentized plastic coated 140 mm Knipex 2001140 Flat Nose Pliers black...
Flat, short, wide jaws Knurled gripping surfaces Chrome vanadium electric steel, forged, oil-hardened
US$15.21 *
Knipex 1640150 Dismantling Tool fibreglass reinforced polyamide 150 mm Knipex 1640150 Dismantling Tool fibreglass...
For dismantling round cables exceeding 25.0 mm dia. Removes all kinds of insulation layers Suitable for longitudinal and circular cutting Cutting depth can be adjusted up to 5.0 mm Replaceable blade (both sides can be used) Tool body:...
US$243.21 *
Knipex 3542115 Electronics Pliers with multi-component grips 115 mm Knipex 3542115 Electronics Pliers with...
Precision pliers for fine assembly work, e g. in electronics and fine mechanics For gripping, holding and bending Sturdy, zero backlash box joint Smooth ground gripping surfaces Edges carefully deburred Low-friction double spring for...
US$36.73 *
Knipex 9539870 Movable spare blade for 95 31 870 / 95 32 100 Knipex 9539870 Movable spare blade for 95 31...
For copper and aluminium single conductors as well as multiple stranded cables - also with hard rubber or plastic sheath Not suitable for steel wire and wire ropes Also suitable for cables with iron sheath reinforcement Little hand force...
US$217.68 *
Knipex 121210 Precision Insulation Stripper burnished 195 mm Knipex 121210 Precision Insulation Stripper...
Form-fit stripping also of difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber- multi-layer too A second pair of blades holds the remaining insulation reliably in place Replaceable shaped blade...
US$141.30 *
Knipex 9571445 Wire Rope and ACSR-Cable Cutter with plastic grips 445 mm Knipex 9571445 Wire Rope and ACSR-Cable Cutter...
For wire ropes and steel rods, copper and aluminium cables Suitable for cutting overhead cables with strain relief wire (ACSR-cables) Angular cutting blades allow cutting of single rope wire Optimum transmission ratio for high cutting...
US$278.96 *
Knipex 3035160 Long Nose Pliers chrome plated with multi-component grips 160 mm Knipex 3035160 Long Nose Pliers chrome plated...
Heavy-duty and hard-wearing gripping pliers Different jaw styles Chrome vanadium electric steel, forged, oil-hardened
US$26.07 *
Knipex 2611200 Snipe Nose Side Cutting Pliers black atramentized 200 mm Knipex 2611200 Snipe Nose Side Cutting Pliers...
Elastic tips: dimensionally stable even when twisted Distortion-tolerant, elastic precision tips Half-round, long, pointed jaws With cutting edges (hardness approx. 61 HRC) for soft, medium-hard and hard wire Vanadium electric steel-...
US$24.38 *
Knipex 7803125 Electronic Super Knips® with multi-component grips 125 mm Knipex 7803125 Electronic Super Knips® with...
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics Ground, very sharp cutting edges without bevel for flush cutting Precision shaped tips cut wires resting on a board from 0.2 mm dia. Joint with...
US$23.09 *
Knipex 973913 Crimping dies Knipex 973913 Crimping dies
Just one tool for the most common crimping applications Crimping dies changed quickly and easily without any additional tool Sorted and protected storage of the interchangeable dies in a round magazine Comfortable, powerful crimping...
US$65.64 *
Knipex 975223 Crimping Pliers burnished 250 mm Knipex 975223 Crimping Pliers burnished 250 mm
For solder-free electrical connections The ingenious lever transmission reduces the handforce up to 30% compared with regular crimping pliers Repetitive, high crimping quality due to precision dies and integral lock (self-releasing...
US$166.20 *
Knipex 982035 Screwdrivers for slotted screws 202 mm Knipex 982035 Screwdrivers for slotted screws...
Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force Handle design prevents rolling Chrome vanadium molybdenum steel
US$7.55 *
Knipex 922761 Precision Tweezers insulated 130 mm Knipex 922761 Precision Tweezers insulated 130 mm
Tested according IEC 60900 With dipped insulation Nickel plated Spring steel, high-strength Straight pattern For ultra fine mounting work Extra fine tips Gripping surfaces matt finished for optimum grip
US$25.22 *
Knipex 4410J5 Circlip Pliers black powder-coated 570 mm Knipex 4410J5 Circlip Pliers black...
For assembling circlips into bores within the range of Ø 122 - 400 mm With locking device, can be released With replaceable tips made of tempered steel Black powder coated Pliers body: rolled steel, high-strength Tips: special tool...
US$147.61 *
Knipex 982500 Screwdriver for cross recessed screws Pozidriv® 162 mm Knipex 982500 Screwdriver for cross recessed...
Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force Handle design prevents rolling Chrome vanadium molybdenum steel
US$7.67 *
Knipex 3015140 Long Nose Pliers chrome plated with multi-component grips 140 mm Knipex 3015140 Long Nose Pliers chrome plated...
Heavy-duty and hard-wearing gripping pliers Different jaw styles Chrome vanadium electric steel, forged, oil-hardened
US$26.07 *
Knipex 7251160 Diagonal Cutter for fibre optics plastic coated 160 mm Knipex 7251160 Diagonal Cutter for fibre optics...
Specially developed for cutting fibre optics (glass fibre cables) With elongated cutting edge Cutting face flush ground Cutting edges additionally induction hardened With opening spring Vanadium electric steel- forged, oil-hardened
US$31.27 *
Knipex 7422250 High Leverage Diagonal Cutter black atramentized 250 mm Knipex 7422250 High Leverage Diagonal Cutter...
For very tough, continuous use High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio Precision cutting edges additionally induction hardened (cutting edge hardness...
US$44.01 *
Knipex 6442115 Electronics End Cutting Nipper with multi-component grips 115 mm Knipex 6442115 Electronics End Cutting Nipper...
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics Sturdy, zero backlash box joint Low-friction double spring for gentle and even opening The polish or mirror polish (only finish 2) together with a fine...
US$49.52 *
Knipex 3221135 Relay Adjusting Pliers black atramentized plastic coated 135 mm Knipex 3221135 Relay Adjusting Pliers black...
For gripping components and wires of the smallest diameters and for bending contact and relay springs Polished gripping surfaces Edges carefully deburred Chrome vanadium electric steel, forged, oil-hardened
US$23.79 *
Knipex 6901130 Mechanics End Cutting Nipper black atramentized 130 mm Knipex 6901130 Mechanics End Cutting Nipper...
With cutting edges for soft, hard and piano wire- also suitable for thin copper wires Lap joint Cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC Chrome vanadium heavy-duty steel, forged, oil-hardened
US$31.66 *
Knipex 002018 Case for Electronics Pliers for working on electronic components Knipex 002018 Case for Electronics Pliers for...
8 parts, contains 2 electronics pliers and 6 electronics screwdrivers Practical storage box, shock-resistant plastic, with foam insert
US$157.49 *
Knipex 7701115 Electronics Diagonal Cutter plastic coated 115 mm Knipex 7701115 Electronics Diagonal Cutter...
For fine cutting work, e.g. in electronics and fine mechanics Sturdy, zero-backlash box joint Low-friction double spring for gentle and even opening The polish or mirror polish (only finish 2) together with a fine film of oil offer...
US$36.14 *
Knipex 986503 Plastic Slip-On Cap conical 80 mm Knipex 986503 Plastic Slip-On Cap conical 80 mm
To cover bare live cable ends (max. 10 mm dia.) Plastic
US$5.66 *
Knipex 124902 1 pair of spare clamping jaws for 12 40 200 Knipex 124902 1 pair of spare clamping jaws for...
For single, multiple and fine stranded conductors with plastic or rubber insulation Adapts automatically to the respective cable cross-section- prevents damage to the conductor Cutting depth can be adjusted for different insulation...
US$4.75 *
Knipex 9532060 Cable Cutter 630 mm Knipex 9532060 Cable Cutter 630 mm
For copper and aluminium single conductors as well as multiple stranded cables - also with hard rubber or plastic sheath Not suitable for steel wire and wire ropes Also suitable for cables with iron sheath reinforcement Little hand force...
US$858.58 *
Knipex 4104250 Grip Pliers nickel plated 250 mm Knipex 4104250 Grip Pliers nickel plated 250 mm
Hold round, profile and flat material securely Heavy duty model With adjustment screw and release lever One-hand operation High clamping pressure due to toggle lever action Pliers body: rolled steel, high-strength Gripping jaws: chrome...
US$22.36 *
Knipex 982055 Screwdrivers for slotted screws 232 mm Knipex 982055 Screwdrivers for slotted screws...
Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force Handle design prevents rolling Chrome vanadium molybdenum steel
US$9.75 *
Knipex 2001125 Flat Nose Pliers black atramentized plastic coated 125 mm Knipex 2001125 Flat Nose Pliers black...
Flat, short, wide jaws Knurled gripping surfaces Chrome vanadium electric steel, forged, oil-hardened
US$15.08 *
Knipex 902902 1 pair of spare blades for 90 25 20 (protective pipes) Knipex 902902 1 pair of spare blades for 90 25...
For cutting composite pipes with diameters from 12.0 to 25.0 mm and for cutting flexible protective tubes with a diameter of 18.0 - 35.0 mm without damaging a potentially pipe inside A calibration arbor can be fitted, for example for...
US$38.60 *
Knipex 974915 Crimping dies Knipex 974915 Crimping dies
US$252.31 *
Knipex 921252 Precision Tweezers 120 mm Knipex 921252 Precision Tweezers 120 mm
Smooth gripping surfaces Non-reflective matt finished Stainless, anti-magnetic Angled tips Extra strong tips
US$20.54 *
Knipex 983906 Hexagon Socket for hexagonal socket screws with internal square 3/8" 75 mm Knipex 983906 Hexagon Socket for hexagonal...
For metric internal hexagonal head screws Basic tool chrome plated Special tool steel
US$39.07 *
Knipex 920253 Precision Tweezers 120 mm Knipex 920253 Precision Tweezers 120 mm
Smooth gripping surfaces Non-reflective matt finished Chrome nickel steel: stainless, anti-magnetic (18/10), very popular electronics quality Gripping surfaces matt finished for optimum grip For SMD-technology* Angled tips, width approx....
US$24.51 *
Knipex 8701560 KNIPEX Cobra® XL/XXL grey atramentized 560 mm Knipex 8701560 KNIPEX Cobra® XL/XXL grey...
Greater gripping capacity but much lower weight than comparable pipe wrenches Fast push-button adjustment directly on the workpiece, no unintentional slipping of the joint Fine adjustment for optimum adaptation to different sizes of...
US$119.86 *
Knipex 002003V02 Set of Circlip Pliers Knipex 002003V02 Set of Circlip Pliers
Attractive sales packaging with Euro standard perforation Cntains common Circlip Pliers for internal and external circlips Sturdy plastic packaging, also suitable for storage of the pliers 4 parts
US$71.70 *
Knipex 7732120HESD Electronics Diagonal Cutter ESD 120 mm Knipex 7732120HESD Electronics Diagonal Cutter...
For extreme demands on cutting pliers caused by hard or tough materials, e.g. piano, nickel, tungsten and diode wire, such as those used more frequently in the electronics and aerospace industries Always the right cutting tool, even with...
US$135.40 *
Knipex 4921A31 Precision Circlip Pliers grey atramentized 210 mm Knipex 4921A31 Precision Circlip Pliers grey...
With inserted tips for reliable work Heavy duty in continuous operation: up to 10 times longer service life compared to turned tips Large contact faces on the tips: no distortion of circlips, easy fitting Bolted joint: precise, zero...
US$27.30 *
Knipex 4421J11 Circlip Pliers black atramentized 130 mm Knipex 4421J11 Circlip Pliers black...
For fitting circlips into bores, range of application from 8 - 140 mm dia. Solid style, forged Non-slip, solid tips Pliers body and tips: chrome vanadium steel, forged, oil-hardened
US$16.58 *
Knipex 1581160 Insulation Stripper plastic coated 160 mm Knipex 1581160 Insulation Stripper plastic...
For stripping thin cables Accurate boring to match diameter of wire, precise stripping prism- non-adjustable With opening spring Chrome vanadium electric steel, forged, oil-hardened
US$35.57 *
Knipex 922213 Precision Tweezers needle-pointed shape 135 mm Knipex 922213 Precision Tweezers needle-pointed...
For ultra fine mounting work Extra fine tips Smooth gripping surfaces Stainless, anti-magnetic Non-reflective matt finished Straight pattern Stainless, anti-magnetic and acid-proof American shape, solid
US$19.97 *
Knipex 9512500 Cable Shears with multi-component grips 500 mm Knipex 9512500 Cable Shears with...
Short design, length only 500 mm Low weigth, high leverage For cutting copper and aluminium single conductors as well as multiple stranded cables Not suitable for steel wire and wire ropes Precision ground, hardened blades Clean and...
US$135.06 *
Knipex 9512165 Cable Shears with multi-component grips 165 mm Knipex 9512165 Cable Shears with...
For cutting copper and aluminium single conductors as well as multiple stranded cables Not suitable for steel wire and hard drawn copper conductors Precision ground, hardened blades Clean and smooth cut without crushing and deformation...
US$35.62 *
Knipex 7861125ESD Electronic Super Knips® ESD burnished with multi-component grips 125 mm Knipex 7861125ESD Electronic Super Knips® ESD...
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics Electrically discharging handles - dissipative Ground, very sharp cutting edges without bevel for flush cutting Precision shaped tips cut wires resting...
US$26.46 *
Knipex 3741125 Flat Nose Pliers black atramentized 125 mm Knipex 3741125 Flat Nose Pliers black...
Precision pliers for fine assembly work, e g. in electronics and fine mechanics For gripping, holding, bending and adjusting Tips precision ground Smooth gripping surfaces Edges carefully deburred Lap joint Chrome vanadium electric...
US$20.22 *
Knipex 2505160 Snipe Nose Side Cutting Pliers chrome plated 160 mm Knipex 2505160 Snipe Nose Side Cutting Pliers...
Suitable for finer gripping and cutting work Pointed, half-round jaws Knurled gripping surfaces With cutting edges for soft, medium-hard and hard wire Cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC...
US$25.61 *
2 From 6
Viewed