Hazet 9012A-1 Ultra Compact Impact Wrench

Application:
Ideal for operating brake calliper screw connections as well as other hard-to-reach screw-joints

Maximum loosening torque: 450 Nm
Ultra compact design enables work even in cramped and hard-to-reach areas
One-hand operation for right and left-handed operators
360° exhaust air guidance, adjustable on the handle
Reduced vibrations
Easy to use
Extra short – only 69 mm
Single hammer striking mechanism
Air connection inlet (from the compressor): Inside thread (IG) 12.91 mm (1/4″)
Coupler plug: nominal size 7.2 (included)
Recommended torque: 231 Nm
Hose diameter (recommended): 10 mm
Working pressure (bar): 6.3
Sound power level: 103.2 db(A) Lp W
Vibration acceleration: 9.96 m/s2
Screw size M: 16
Forward and reverse: three-stage (forward), single-stage (reverse)
Cold insulated handle
Total length: 69 mm
Output: Square, solid 12.5 mm (1/2 inch)
Net weight: 1.16 kg
Tightening torque max.: 325 Nm
Maximum loosening torque: 450 Nm
Sound pressure level: 92.2 dB(A) Lp A
Revolutions per minute: 8500
Air requirement: 113 l/min (1.9 l/sec)